With almost three decades of experience, our fine work and craftsmanship is un-surpassed. In addition to repair work, here at The Texas WoodWorks, we also custom design and build furniture. Keeping this in mind, we have the tools, machinery and skills to implement just about any kind of repair. We are able to carve and fabricate the missing parts when required. Many of the repairs we perform are on site. If necessary, we can arrange to pick up your furniture and repair it in our shop. Obviously, drop-offs are always welcome. We strive to be the best and you can rest assured that your furniture is in good hands.
Residential - Commercial - Industrial - Boat - RV
Stripping is performed either by hand or with a flow-over system. The flow-over system is a 'no dip' system. The way it works is that the stripping chemical is pumped from a drum through a tube that is attached to a hand-held stripping brush and the stripping chemical then flows out of the brush and onto the piece of furniture. This rapidly wets down the piece. The stripping agent works fairly quickly and the piece is lightly hand scrubbed to remove the rest of the old finish. The excess stripping agent runs down the stripping tray and into a bucket where it is recycled for further use. The amount of time the furniture is subjected to stripping chemical is minimal and therefore does not harm the wood. In contrast, the old dip tanks were very harmful to the wood because the furniture actually was completely dipped and submerged for a length of time causing the wood to swell and split. For those of you that enjoy the DIY refinishing process, we have a 'strip only' price. For the finish, we generally use the highest quality oil stains, aniline dyes and lacquers. This will assure that fine look for many generations to come. Needless to say, we can also apply many other finishes at the customer's request
This page is under construction
Have you ever had an insurance company Claims Adjuster tell you how much your automobile damage claim is worth only to find out that every body shop in town wants a lot more to repair it? Well, it happens to furniture claims also. Who would be better able to give an accurate estimate than the person that will actually be doing the repair work? Need I say more? Just give us a call and we will do our best to see that your needs are taken care of.
Have woodworking experience and need a place to play? Live in a condo and want to build your own cabinets? Finally retired and want to build those family heirlooms for your grandchildren? Give us a call and we will see if we can work out a plan that suits your needs.
Our classes will normally be scheduled during the winter months, typically from mid-November through February. The first night will be an introduction to furniture design and basic tools. The tools we will use are typical of the tools found in most home workshops .You choose your own project and Tony B will supervise and guide you along the way. Call now for more information.
Most of our boat and RV work is limited to woodwork. However if some minor fiberglass repairs are needed, we can handle it. We also sell 3-strand twisted and double braided nylon rope for anchor and dock lines as well as double braided polyester for halyards and sheets. We will splice all of your lines for an additional fee.
SERVICES
WoodWorks.
1635C Dickinson Ave. Dickinson, Tx 77539
